No Access Drain Connections

NO UP-STEM | MEASURE THROUGH FLANGE INTO WASTE


Place flange spacers from flange kit onto flange to designate height of assembly for the flange to be set above subfloor in order to accept a Schluter shower tray.  Position flange with spacers in hole through subfloor directly over the waste below.

 

Insert a tape measure through the neck of the flange down into the waste line to determine the length of the ABS/PVC stem that will need to be cut.  Reference red lines below.


Cut ABS/PVC stem.  Clean burs and dry fit before spreading mortar for flange and glue for flange connection.  Make adjustment cut if needed.

 

 
 
PLUMBING STEMMED UP THROUGH SUBFLOOR
 
 Stem up from the waste through the sub-floor.  Make sure the hole around the stem is no larger than template included in the flange kit (4.5” to 5” max).
Two cuts will be made with this method of no access connection to the waste
 

Cut the ABS/PVC stem flush with the top of the subfloor using a plunge cut blade on an oscillating multi-tool.  Clean the burs from the stem.  


Place the shower tray on the subfloor first without mortar.  Dry fit the flange by placing it on the flush cut stem.   Measure from the flange down to the white break-outs of the Schluter shower tray.  This will be the measurement of the second cut (should be very close to 3”).  


For the second cut, use an inside pipe cutter with a standard drill. The second cut will be around 3” below the first cut.  Clean the burs from the stem from the second cut.  

 

Dry fit the flange once more to ensure the proper nesting of the flange on the white break-outs before spreading mortar for the tray or cleaning and gluing flange to stem.

 

Spread mortar on subfloor to receive the tray.  Embed the tray in the mortar bed.  Glue flange into mortar bed over center break-out section of tray.  Complete waterproofing with KERDI donut.  Nifty tool made by Ebbe to grab and pull up on inside of the stem while also pushing down on flange until glue sets.


POPULAR POSTS

2024 Illustrated Price List Update

Pricelists for each new year will be physically and digitally available each year in March. Price increases (if there will be any) will take affect with the new price book for that release year every April 1st. As of now, I am currently unaware of any price increases. That is not to say there will not be any; I am just not yet informed as to what will be released. Schluter is moving toward a greener initiative by promoting the Schluter APP and the downloaded-able PDF with integrated navigational links (my personal choice). These two options will always be the fastest/earliest to access, and always up to date. In March, a limited/monitored number of physical copies (hard and spiral bound) will automatically be allocated and shipped to each distributor and Schluter Authorized Dealer (ASD). Customers may request a physical copy from their distributor or dealer of choice, or contact csrusa@schluter.com to request a copy. Sales reps may of course provide them as well. Please feel free to r
Read more

Exterior Applications | Introduction to Pedestals/TROBA-Level

Image
A NEW APPROACH TO EXTERIOR APPLICATIONS. Due to our harsh climate in the intermountain region (either baked by the Sun, or vulnerable to freeze/thaw conditions - or even both) tile assemblies see limited success. In fact, it’s safe to say that it’s not if an assembly is going to show distress - but when . As such, Schluter has implemented a process to protect the installer, end user and ourselves by evaluating exterior requests on a case by case basis and thus eliminating high risk jobs. Exterior applications need time to study, plan, specify, estimate and install. They cannot be rushed, and ‘best’ assemblies cannot be assumed.  The LETTER OF EXPLANATION will lay out what Schluter will require before we can work towards creating a detail specific to a respective application. The CONSTRUCTION CHECKLIST has bullet points that must be addressed. This document must be signed and dated by the respective parties involved (i.e. contractor, GC or/and home owner). The EXTERIOR PRICELIST  is
Read more

INVITATION - Washoe Club Ghost Tour & Dinner

Image
This invitation is only valid if you received this from an invited and participating Reno area Schluter distributor or dealer.   Spooky season is upon us! The year is almost gone, and Schluter would like to thank you for your long hours and hard work. Join us for a a recharge with a ghost tour at the famous Washoe Club in Virginia City followed by food and drinks at the bar on conclusion!   Sean Carse (Regional Manager), Chris Hill (Territory Manager) and Ian Zavala (Architectural Manager) will be present.    Everyone will be responsible for their own transportation up and down the mountain. I have not had luck with any ride shares wanting to bring me off the mountain at night. Thus, drink responsibly. 🙃     Washoe Club Ghost Tour & Dinner 112 S C Street Virginia City, NV 89440 Tour Start 6:00 PM Dinner 7:00 PM Please be at the club and ready for the tour by 5:45 PM. Another group may be scheduled to start following our tour. A prompt start means a full tour.    Justin Seagraves
Read more

Pleasant Valley Hunting Preserve

Image
Join us for a day in the field hunting pheasants at Pleasant Valley Hunting Preserve! An Orvis endorsed hunting ground. Hunts begin at 9:00 AM.   Arrive 30 minutes early to sign release forms and attend the safety meeting. Pleasant Valley Hunting Preserve 3733 W 10000 S Myton, UT 84052   pvhunting.com   RSVP (required) Chris Hill 801-834-0744 chill@schluter.com   IMPORTANT Drive is a little over two hours from Salt Lake Valley. Winter driving conditions can be hazardous through both Parleys/Strawberry and Highway 6/Indian Canyon routes.  Plan additional time if needed. Bring your own gun(s) and shells. Wear hunter/safety orange (hat, vest or jacket). PVHunting gear also available to purchase from lodge. Bring drinks/snacks to fuel while hunting. Hunts could cover up to 5 miles walking. Dress warm. Fall weather can turn cold fast, and winter speaks for itself! There are 4 birds per person. Birds will be released the morning of the hunt. Fly away birds are goners, but we may have fly aw
Read more

UPDATE: 2024 Price List/Price Increase Information

Image
    The 2024 price lists are here!    Customer notification dates are listed below: February 28th           Distribution Partners March 6th                   Schluter Authorized Dealers March 13th                Dealers and all others   Prices in the new 2024 price books will take affect on April 1st.    Despite ongoing inflation and rising costs, we've limited the price increase to just 2.5% across all products, except DITRA (including DITRA-XL), KERDI waterproofing membrane, and both SCHIENE and JOLLY profiles and accessories in all finishes which will not increase in price.    There will be no changes to the freight program located in the back of the book.   I will update this post with the link to download the digital copies from Schluter's website as soon as they become available. PHYSICAL COPIES ARE BEING PROCESSED NOW AND WILL AUTOMATICALLY SHIP TO EACH DISTRIBUTOR LOCATION. Spiral bound copies are for sales teams/order desks. Hard bound copies may be distributed to y
Read more