Daltile Luxora & Schluter Systems Compatibility

To download Schluter's formal statement in PDF form, click here.

Testing of Luxora Shower Wall Panels & Surrounds was conducted by the Schluter Laboratory for compatibility of adhesives with their metal tile panels and Schluter KERDI waterproofing membrane.

Four different adhesives were tested:
  • DAP AMP Kitchen & Bath Sealant
  • KERDI-Fix
  • Loctite Power Grab Ultimate
  • Maxisil MaxiGrab Original
The sealants were tested (for 7 Day Dry/Wet shear strength only) in accordance with ANSI 118.10, American National Standard Specifications for Load-Bearing, Bonded, Waterproof Membranes for Thin-set Ceramic Tile and Dimension Stone Installation. The ANSI A118.10 sealant test was modified based on Luxora's application recommendation/installation guidelines.

In our testing, Schluter-Systems products met or exceeded the required 50 psi for compliance with ANSI A118.10. Please refer to the Schluter-Systems handbook for Schluter KERDI waterproofing installation details. Please refer to Daltile or the panel manufacturer for tile installation method compliance for the installation of Luxora panels.

The Schluter KERDI waterproof envelope is subject to a 10-year or lifetime warranty dependent on the products used, so long as the waterproofing methods follow installation instructions according to the Schluter Shower Installation Handbook. Please refer to the Schluter-Systems Waterproofing Technical Data Sheet for additional warranty information.

Schluter-Systems does not warrant and is not responsible for the performance of non-Schluter components or workmanship in the Luxora Shower Wall Panels and Surrounds installation. The installer must follow the Luxora installation instructions for panel installation.

It is the responsibility of the owner, builder, and/or installer to ensure the suitability of all Schluter-Systems products and all associated building materials for the owners intended use.





POPULAR POSTS

2025 Pricebook & Price Increase Information

Schluter®-Systems USA 2025  Pricing Dear Valued Partner,  Please be advised that we will be implementing a price increase, effective April 1, 2025.  As always, our goal is to keep price increases to a minimum despite rising costs. As such, this year’s increase will be limited to just 2%.  Additionally, some products WILL NOT incur any increase in price, namely: SCHIENE in all materials/finishes except stainless steel and brass, KERDI-BOARD-SNLT niches with LED lighting, and LIPROTEC drivers and cables.  To download the Excel spreadsheet containing new pricing, click here . It can also be obtained through your local Schluter Sales Representative or our Customer Support Team.  Our 2025 price list catalogs are in production now, you will be notified when they become available either by your direct distribution partner or Schluter territory sales manager.  Thank you for your continued partnership. We are always just a phone call away, please don’t ...
Read more

2025 Updated Price List Available Now | Effective October 1st

Image
Dear Valued Partner, The Schluter Systems Price List catalog is now available with updated pricing effective October 1, 2025. You can download the PDF and Excel versions using the links below on October 1st. This is our BEST-LOOKING price list yet! Great job, marketing team! Printed copies have been allocated and will be shipped to all of my T08 distribution partners (northern UT and NV). Quantities are limited; thus we encourage all to take advantage of the PDF digital format , Schluter Website or Schluter APP available on iPhone or Android. Download the Price List PDF Download the Price List Excel NEW PRODUCTS Remember to take a look at our latest innovations! Horizontal LIPROTEC Niches Trendline Colors for KERDI-Line and KERDI-Line VARIO Drains Schluter DESIGN-Niche Drain Adapters & Compensation Board Schluter DILEX-STF Schluter DILEX-AHK and AHKA New Colors Why the update price list this fall? Like all manufacturers, Schluter has been impacted by recently implemented tariffs. T...
Read more

KERDI-SHOWER-CB for KERDI Drain Adapter

Image
If you are familiar with our Schluter KERDI-Drain/KERDI-Line adapters (for tying the KERDI shower system into a pre-installed two stage drain), and you want to use a Schluter Shower Tray , then you know the tray will need to be lifted so that the drain flange will nest properly onto the shower tray recess. This is because the drain body and the adapter are installed over the subfloor rising above the surface enough to inhibit proper flange nesting on the tray. The solution required the installer to source enough 1/2" backer to fully embed beneath the shower tray to lift it enough so that the flange would nest properly. Usually this required two layers of 1/2" beneath the tray. Schluter now offers a 1" thick foam compensation board called KERDI-Shower-CB ( KSCB 25 610 1220 ), which is a 48" x 24". When you purchase this SKU, you get a bundle that includes 6 of these boards at just $27.20 MSRP! This will save time and money when seeking material to lift the sho...
Read more

2025 New Products!

Image
  We have an exciting line of new products joining our existing offering for 2025! As distributed at TISE in Las Vegas recently, please click here to download the 2025 New Products Brochure! These are all amazing products - I would for sure encourage you to keep stock of the two new drain adapters... Schluter®-DESIGN-NICHE is a prefabricated niche made of powder-coated aluminum to create storage space for any wall area. Its adjustable frame fits any tile thickness for a flush installation or can be installed with a reveal edge for a stylish design. It is available in three different sizes, five TRENDLINE colors, and has the versatility to be installed horizontally or vertically.  9 newTrendline VARIO colors 7 new Trendline KERDI-Line colors New matte white KERDI-Line color 12x20 and 12x28 Horizontal Niches Schluter®-DILEX-STF is a maintenance-free expansion joint profile system made of aluminum. The interlocking center section allows for movement in 3 directions - hori...
Read more

DITRA-Heat in Shower | Detail & Tray Adjustments

Image
Installing DITRA-Heat in a shower increases the floor assembly height by the thickness of the membrane used; 1/4” for DITRA-Heat membrane and 5/16” for DITRA-Heat DUO membrane. DH-SH-23 is the detail taken from the DITRA-Heat installation handbook with critical information for installing DITRA-Heat in a shower application. Photos of the detail are included below. When Using Schluter Shower Trays Remove the center break-out section of the tray that supports the drain flange, highlighted in green below. Use the break-out as a template to cut a ring out of the DITRA-Heat membrane that you are using.  Install the DITRA-Heat membrane underneath the break-out support to lift the flange assembly up to meet the DITRA-Heat membrane that will be installed over the shower tray as shown below.   KERDI waterproofing membrane must be installed over the wire in the shower floor so that the sealed waterproof envelope is over the whole assembly. For KERDI-Line drains, use the grey foa...
Read more